- From 45 up to 2700A
- Max. voltage 480V or 600V & 690V AC as an option
- Load type: Inductive Load, Transformer and MoSi2 element.
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: Burst Firing, Delay Triggering + Burst Firing, Phase Angle + Soft Start
- Current Limit is available with Phase Angle Firing
- N°4 Retransmission are available plus IO
General Details
Multidrive 3PH Thyristor Power Controller
- Suitable for normal resistance & transformer coupled with normal resistive loads
- Thyristors for resistive, inductive & transformer loads
- Current range – 35A, 45A, 75A, 100A, 125A, 225A, 300A, 350A, 400A, 450A, 500A, 600A, 850A, 1000A, 1400A, 1500A, 1850A, 2000A, 2400A, 2700A
- Supply voltage up to 480V as standard, 600V & 690V available as option (690V not available on 1000A, 1500A, 2000A & 2700A units)
- Microprocessor based electronic circuit fully isolated from the power
- Firing types include Burst Firing (BF), Single Cycle (SC), Soft Start + Burst Firing (S+BF), Delayed Triggering + Burst Firing (DT+BF), Phase Angle (PA), Soft Start + Phase Angle (S+PA).
- Input signals from 4-20mA, 0-10V DC Linear input, 10K Pot or RS485 comms
- Selectable control modes include V, I, VxI, V2
- Current limit as standard including internal current transformer, fully adjustable via front panel keypad
- Profiling of current limit via analogue input
- Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication.
- 4 configurable Analogue outputs, 4 Relay outputs and 6 Digital inputs as standard
- Internal quick-blow fuses as standard
- RS485 comms (Modbus Protocol) as standard
- Critical Alarms monitor phase loss, rotation and provide Thermal Protection
- Special design Heatsink with high dissipation value
- IP20 protection, cUL us is available as an option.
Manuals
Name | Size | Date |
---|
ENG L M CD Multidrive-3PH 1000A |
2.9 MiB 14 July 2015![]() |
ENG L M CD Multidrive-3PH 1100-2100A |
3.1 MiB 2 May 2016![]() |
ENG L M CD Multidrive-3PH 2000A |
3.0 MiB 4 June 2014![]() |
ENG L M CD Multidrive-3PH 35-850A |
3.4 MiB 4 June 2014![]() |
FRA L M CD Multidrive-3PH 25-850A |
3.9 MiB 4 June 2014![]() |
GER L M CD Multidrive-3PH 25-850A |
3.2 MiB 14 July 2015![]() |
ITA L M CD Multidrive-3PH 25-850A |
3.3 MiB 4 June 2014![]() |
Name | Size | Date |
---|
Software
Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system. |
2.0 MiB 6 May 2016![]() |
Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file. |
1.3 MiB 6 May 2016![]() |
Size & Dimensions
- Size S13/S14 – H 440/520 x W 262 x D 270 – 18 Kg.
- Size S15 – H 520 x W 400 x D 270 – 43 Kg. Current Range 850A
- Size SR20 – H 640 x W 523 x D 347 – 59/75 Kg. Current Range 1100-1400A
- Size SR23 – H 640 x W 717 x D 347 – 86/110 Kg. Current Range 1700-2700A