- From 25 up to 700A
- Max. voltage 480V or 600V AC as option
- Load type: Resistance, Transformer
- Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
- Firing mode: Burst Firing, Delay Triggering + Burst Firing (DT)
- N°1 Retransmission is available
General Details
REVO E 2PH Thyristor Power Controller
- Thyristor Power Controller Units suitable for Normal Resistance, Medium lamp; Long Wave IR, and Silicon Carbide load types.
- Two leg switching of three wire star or delta loads
- Current range – 25A, 35A, 45A, 75A, 100A, 125A, 150A, 200A, 275A, 400A, 450A, 500A, 600A, 700A
- Fully digital and user configurable for all inputs, firing modes, feedback modes and load types
- Firing modes include zero crossing (ZC), burst firing (BF), delayed triggering (DT)
- Microprocessor based electronic circuit fully isolated from power
- Universal input signal with automatic zero/span calibration
- Power or voltage feedback
- RS485 Comms MODBUS protocol as standard
- Unbalanced load
- Heater break alarm as standard to diagnose partial or total load failure and short circuit
- Control & monitor (power, current & voltage) via front panel keypad & display
- IP20 protection, cUL us is available as an option.
Manuals
English
| Name | Size | Date |
|---|
| ENG L M CD CD3000E-2PH 25-700A |
1.9 MiB 4 June 2014 |
| ENG L M CD CD3000E Serial-communication |
464.2 KiB 4 June 2014 |
Italiano
| Name | Size | Date |
|---|
| ITA L M CD CD3000E-2PH 25-700A |
1.9 MiB 4 June 2014 |
Deutsch
| Name | Size | Date |
|---|
| GER L M CD CD3000E-3PH 25-500A |
2.1 MiB 4 June 2014 |
Français
| Name | Size | Date |
|---|
| FRA L M CD CD3000E-3PH 25-500A |
2.6 MiB 2 October 2017 |
Datasheet
Software
| ThyristorConfigurator V5.6.4.14 Thyristor configurator sofware |
27.0 MiB 26 May 2016 |
| Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system. |
2.0 MiB 6 May 2016 |
| Driver-USB-for-programming-cable CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file. |
1.3 MiB 6 May 2016 |
Size & Dimensions
-
- Size S9 – H 440 x W 137 x D 270
-
- Size S11 – H 440 x W 137 x D 270
-
- Size S10 – H 350 x W 240 x D 244 – 11 Kg. Current Range 280A
-
- Size S14 – H 520 x W 262 x D 270
CD KP Operating terminals for Thyristor Units
- Operating terminals for Thyristor Units
- N°2 Display
- 48x96 Front Panel
- Re-Transmission
- Thyristor Configuration Port
- Multi Language Interface
- For CD3000M, CD3200, CD3000E and MULTIDRIVE.
REVO KP2
- Up to 6 zone can be managed
- 4.3, 7.0, 10” Colour Display
- Trend display
- Thyristor Configuration Recipy Management
- Multi Language Interface
- For REVO M, REVO CL, CD3000E and MULTIDRIVE.
TU-RS485-PB Profibus DP to Modbus RTU Converter
- Protocol Converter / Gateway from serial interface to PROFIBUS DP
- The PROTOCOL CONVERTER TU-RS485-PB connects devices such as thyristor units, controller and soft starter via their serial interfaces to Profibus DP. RS232, RS485 und RS422 interfaces are on Board as a standard feature.
TU-RS485-ETH-DL-IO Ethernet to Modbus Converter
- N.1 serial interface RS-485 Modbus RTU Master
- N.1 serial interface RS-485/232 Modbus RTU Slave
- USB Port with USB 8GB Memory Key for Data Logging
- Interface Ethernet 10Base-T, Modbus TCP
- N.4 Digital Inputs + N.2 SPDT Relays
- Functional Block programming software
CD-RS RS232 to RS485 RS422 Signal Converter 2500V Insulation
- Configurable communication
- RS485 or RS232RS232 front panel connector
- 2500V insulation between input and output
- Side by side mounting
- DIN rail mount or bulk head mounting
- Input and output data transfer LED indication