• From 35 up to 500A
  • Max. voltage 480V or 600V AC as option
  • Designed to drive resistive, transformer loads and MoSi2 Elements
  • Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
  • Firing mode: zero crossing, burst firing, single cycle, soft start + burst firing and phase angle + soft start
  • N°1 Retransmission is available

General Details
REVO E 3PH Thyristor Power Controller (CD3000E 3PH) is a Universal and Digital Unit based on configurable powerfull microprocessor. It is possible to configure all inputs, the firing mode and control mode for all load type.

  • SCR Power Controller suitable for most applications including Short Wave Infrared (SWIR) & Inductive load types
  • Current range – 35A, 45A, 75A, 100A, 125A, 150A, 225, 300A, 350A, 400A, 450A, 500A
  • Three leg switching of 3/4 wire star or 3/6 wire delta loads
  • Fully digital and user configurable for all inputs, firing modes, feedback modes and load types
  • Firing modes include zero crossing (ZC), burst firing (BF), single cycle (SC), soft start + burst firing (S+BF) and phase angle + soft start (S+PA)
  • Microprocessor based electronic circuit fully isolated from power
  • Universal input signal with automatic zero/span calibration
  • Power feedback or voltage compensation
  • RS485 Comms MODBUS protocol as standardUnbalanced loadHeater break alarm to diagnose partial or total load failure and short circuit
  • Control & monitor power, current & voltage via external keypad (CD-KP)
  • IP20 Protection
Manuals
NameSizeDate
ENG L M CD CD3000E-3PH 25-500A

2.1 MiB 2 October 2017
ENG L M CD CD3000E-3PH 25-600A Profibus

2.2 MiB 4 June 2014
ENG L M CD CD3000E-3PH 25-600A-basic

3.4 MiB 4 June 2014
FRA L M CD CD3000E-3PH 25-500A

2.6 MiB 2 October 2017
GER L M CD CD3000E-3PH 25-500A

2.1 MiB 4 June 2014
ITA L M CD CD3000E-3PH 25-500A

2.1 MiB 4 June 2014

NameSizeDate
Datasheet
Software

Driver-USB-for-programming-cable

CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system.

2.0 MiB 6 May 2016

Driver-USB-for-programming-cable

CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file.

1.3 MiB 6 May 2016

Size & Dimensions