• From 30 up to 700A
  • Max. voltage 480V or 600V AC as option
  • (690V available on units > 280A)
  • Load type: Resistance, IR Lamp short waveform and SiC element.
  • Inputs: SSR, 0:10V, 4:20mA, 10KPot and Communication Std.
  • Heather Break is available as an option.
  • Firing mode: Burst Firing, Single Cycle & Phase Angle as standard

General Details
REVO M 1PH Thyristor Power Controller

  • Thyristors suitable for Normal Resistance, Short, Medium & Long Wave IR, and Silicon Carbide load types
  • Current range – 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 500A, 600A, 700A
  • Supply voltage up to 480V, 600V (690V available on units > 280A)
  • Microprocessor based electronic circuit fully isolated from the power
  • Firing types include Zero Crossing, Single Cycle, Burst Firing, Soft Start + Burst Firing, Delayed Triggering + Burst Firing, Phase
  • Angle, Soft Start + Phase Angle
  • Input signals from DC Logic (SSR), 4-20mA, 0-10V DC Linear input, 10K Pot or RS485 comms
  • Selectable control modes include V, I, V2 & VxI
  • Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication.
  • Available as an option
  • Digital inputs configurable via front panel keypad
  • Internal quick-blow fuses as standard
  • RS485 comms (Modbus Protocol) as standard
  • Internal Current Transformer included as standard
  • Special design Heatsink with high dissipation value
  • IP20 protection
  • Complies with CE specification, cUL pending
Manuals
en

English

NameSizeDate
ENG L M CD REVO M-280-700-1PH

Manual REVO M 1PH from 280A to 700A (English Version)

3.7 MiB 4 June 2014
ENG L M CD REVO M-35-40-1PH

Manual REVO M 1PH from 35A to 40A (English Version)

3.8 MiB 4 June 2014
ENG L M CD REVO M-60-210-1PH

Manual REVO M 1PH from 60A to 210A (English Version)

2.5 MiB 4 June 2014


it

Italiano

NameSizeDate
ITA L M CD REVO M-280-700-1PH

Manuale REVO M 1PH da 280A a 700A (Versione Italiano)

3.8 MiB 4 June 2014
ITA L M CD REVO M-35-40-1PH

Manuale REVO M 1PH da 35A a 40A (Versione Italiano)

4.0 MiB 4 June 2014
ITA L M CD REVO M-60-210-1PH

Manuale REVO M 1PH da 60A a 210A (Versione Italiano)

2.6 MiB 4 June 2014

de

Deutsch

NameSizeDate
GER L M CD REVO M-280-700-1PH

Manuelle REVO M 1PH von 280A bis 700A (Deutsch Version)

2.0 MiB 4 June 2014
GER L M CD REVO M-35-40-1PH

Manuelle REVO M 1PH von 35A bis 40A (Deutsch Version)

1.6 MiB 4 June 2014
GER L M CD REVO M-60-210-1PH

Manuelle REVO M 1PH von 60A bis 210A (Deutsch Version)

1.4 MiB 4 June 2014

 

Datasheet
Software
ThyristorConfigurator V5.6.4.14

Thyristor configurator sofware
CD3000M
CD3200
Multidrive 1/2/3 PH,
CD3000E 2/3 PH,
REVO E 2/3PH,
REVO M 1/2/3 PH,
REVO CL
REVO PC RPC08 / RPC18 / RPC28 / RPC38 / RPC48

24.9 MiB 26 May 2016

Driver-USB-for-programming-cable

CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system.

2.0 MiB 6 May 2016

Driver-USB-for-programming-cable

CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file.

1.3 MiB 6 May 2016

Size & Dimensions