- From 30 up to 500A
- Max. voltage 480V or 600V AC as option
- Load type: Resistance, IR Lamp long and medium waveform
- Inputs: SSR Std, 0:10V, 4:20mA and Heather Break alarm are options
- Firing mode: Zero Crossing, Burst Firing available with analogue input only
General Details
REVO S 3PH Thyristor Power Controller
- SCR Power Controller Unit suitable for resistive and medium or long wave infrared loads
- Current range – 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 300A, 350A, 400A, 450A, 500A
- Supply voltage up to 480V or 600V AC as option
- Fully isolated from the power
- Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
- Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option
- Constant current drain, independent of supply voltage with SSR input
- Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
- Side by side mounting
- Special design Heatsink with high dissipation value
- IP20 protection
- Complies with CE and cUL (pending)
- Can be used in conjunction with REVO-PC to provide multi-zone control
Manuals
| Name | Size | Date |
|---|
| ENG REVO-S-3PH-30-40A-Solid-State-relay |
1.0 MiB 19 October 2018 |
| ENG REVO-S-3PH-300-800-Solid-State-relay |
1.3 MiB 19 October 2018 |
| ENG REVO-S-3PH-60-210A-Solid-State-relay |
1.1 MiB 19 October 2018 |
| ENG REVO-S-3PH-60-800-690V-Solid-State-relay |
1.4 MiB 3 April 2019 |
| ENG REVO-S-IFH-3PH-30-40A-Solid-State-relay |
1.7 MiB 19 October 2018 |
| GER L M CD REVO S IFH-30-40-3PH |
1.0 MiB 4 June 2014 |
| GER L M CD REVO S-225-500-3PH |
1.4 MiB 4 June 2014 |
| GER L M CD REVO S-30-40-3PH |
635.4 KiB 4 June 2014 |
| GER L M CD REVO S-60-210-3PH |
2.9 MiB 4 June 2014 |
| ITA REVO-S-3PH-30-40A-Solid-State-relay |
936.2 KiB 19 October 2018 |
| ITA REVO-S-3PH-300-800-Solid-State-relay |
1.1 MiB 19 October 2018 |
| ITA REVO-S-3PH-60-210A-Solid-State-relay |
1.0 MiB 19 October 2018 |
| ITA REVO-S-3PH-60-800-690V-Solid-State-relay |
1.1 MiB 3 April 2019 |
| ITA REVO-S-IFH-3PH-30-40A-Solid-State-relay |
1.6 MiB 19 October 2018 |
Datasheet
| Name | Size | Date |
|---|
| ENG REVO S 3PH 30 To 40 |
597.5 KiB 4 June 2014 |
| ENG REVO S 3PH 300 To 500 |
497.8 KiB 4 June 2014 |
| ENG REVO S 3PH 60 To 210 |
493.2 KiB 4 June 2014 |
Size & Dimensions
-
- Size SR5 – H 121 x W 108 x D 125 – 1.32 Kg. Current Range 30-40A
-
- Size SR8 – H 121 x W 108 x D 185 – 1.83 Kg. Current Range 30-40A
-
- Size SR16 – H 273 x W 186 x D 170 – 7 Kg. Current Range 60-90A
-
- Size SR17 – H 273 x W 279 x D 170 – 10.6 Kg. Current Range 120-210A
-
- Size S13/S14 – H 440/520 x W 262 x D 270 – 18 Kg.
REVO PC Reduce Power Peaks and Maximise your Savings
- Suitable for Normal Resistance and IR Lamp
- To be used with REVO S and REVO Sx
- Firing Mode: SC, HC and Dynamic Burst Firing
- Reduce Peak of Power and let you save Energy
- Modbus RTU, Profibus, Profinet, Modbus TCP, Ethernet IP and other fieldbus
- Heather Break Alarm
REVO TU Flat Cable Wiring System
- Terminal Unit for Simplificated wiring of Heater Break Option
- Available for REVO SSR up to 40A and Revo SSR
- Push Button and DI for HB tuning