• Suitable for Normal Resistance
  • Three Phase 3PH (3-Leg) From 30A to 210A
  • Max. voltage 480V, 600Vac
  • Load type: Resistance
  • Inputs: Pt100, Thermo Couple, 0:10V, 4:20mA
  • Heather Break alarm options
  • Firing mode: Zero Crossing

General Details
REVO TC 3PH Temperature and Power Controller

  • Suitable for Normal Resistance load types
  • Current range – 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A
  • Supply voltage up to 480V, 600Vac
  • Microprocessor based electronic circuit fully isolated from the power
  • Thyristor Firing types include Zero Crossing Firing
  • Controller input signals from Thermocouple, PT100 (3 wire RTD), 4-20mA and 0-10V DC Linear
  • Up to 4 configurable Controller outputs (Relay, SSR and 4-20mA)
  • Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
  • Internal quick-blow fuses as standard
  • RS485 comms (Modbus Protocol) as standard
  • Internal Current Transformer included as standard
  • Special design Heatsink with high dissipation value
  • IP20 protection
  • Complies with CE specification

REVO TC 3PH is a Compact Solution that Integrate Temperature and Power Controller in One Unit:

  • Single Loop PID Temperature controller
  • Three Phase 3PH Thyristor Power Control units
  • Current Transformers
  • Fuse-Holder

The final result is a cost saving in terms of space and cabling.
Cabinet with REVO TC

Manuals
Datasheet
Software
Revo-TC-Configurator

4.5 MiB 21 December 2015

Driver-USB-for-programming-cable

CCA Cable for unit configuration need a driver to be used on Windows PC. This is the executable version to install automatically the driver into the PC system.

2.0 MiB 6 May 2016

Driver-USB-for-programming-cable

CCA Cable for unit configuration need a driver to be used on Windows PC. This is the zipped version of ini file.

1.3 MiB 6 May 2016

Size & Dimensions