• Up to n°14 REVEX can be connected for each terminal module
• Secondary communication port to connect REVO HMI
• Main process variable available
• 24Vdc Power Supply
• Simplified configuration

Field Bus Module Example:

The post FIELD BUS Module appeared first on Toshcon CD Automation Pvt. Ltd..

Protocol Converter / Gateway from serial interface to PROFIBUS DP

TU-RS485-PB Profibus DP to Modbus RTU Converter is a PROTOCOL CONVERTER that connects devices such as thyristor units, controller and soft starter via their serial interfaces to Profibus DP. RS232, RS485 und RS422 interfaces are on Board as a standard feature.
The communication between the serial side and the Profibus takes place either through the device configuration and a selection of the commercially available protocol, such as Modbus ASCII, Modbus RTU (Master or slave), 3964 (R), RK512, DIN measuring bus, DIN 19244, or the device is controlled by a script.

• Complete PROFIBUS
• Max. 244 byte input- and 244 byte output-data
• Automatical Baud rate recognition (9600 bit/s-12 Mbit/s)
• Isolated PROFIBUS interface with 9-pin. D-sub connector, optional galvanic isolation of the RS-side
• Serial RS232, RS 422-, RS485- and SSI-interface on board
• Baudrate of the device’s serial interface adjustable up to 625,000 bit/s
• PROFIBUS address adjustable via rotary switch
• When using the RS485-device interface up to 32 participants can be connected
• Configurable for standard applications (Modbus ASCII, Modbus RTU Master or Slave, RK512, 3964, 3964R, DIN 19244)

The post TU-RS485-PB Profibus DP to Modbus RTU Converter appeared first on Toshcon CD Automation Pvt. Ltd..