REVO I SCR Units https://www.cdautomation.in/products/revo-i-family/ Industrial Automation Tue, 16 Sep 2025 09:54:44 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.2 https://www.cdautomation.in/wp-content/uploads/cropped-Icona-sito-32x32.webp REVO I SCR Units https://www.cdautomation.in/products/revo-i-family/ 32 32 REVO I 2PH – 2 Phase Unit to drive 3 phase load https://www.cdautomation.in/product/revo-i-2ph-2-phase-unit-to-drive-3-phase-load/ Thu, 27 Jul 2023 07:56:10 +0000 https://www.cdautomation.in/?post_type=products&p=85342 REVO I 2PH 2 phase unit to drive 3 phase load Toshcon CD REVO I – 2PH is a Full digital and Burst Fired Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, control modes with Burst Firing (3-255 Burst) or Zero Cross over firing Micro USB […]

The post REVO I 2PH – 2 Phase Unit to drive 3 phase load appeared first on Toshcon CD Automation Pvt. Ltd..

]]> REVO I 2PH

2 phase unit to drive 3 phase load

  • Toshcon CD REVO I – 2PH is a Full digital and Burst Fired Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, control modes with Burst Firing (3-255 Burst) or Zero Cross over firing
  • Micro USB / RS485 to configure the Thyristor, software free available
  • Suitable to drive resistive & transformer coupled loads
  • Universal Input Signal with automatic zero / span calibration
  • Number of Burst, customer configurable via RS485 comm. as Burst Firing
  • 2nd Analogue Input for external feedback / Alternate Set point
  • Universal Control mode V/ V2/ I/ I2/ Vxl/ external feedback
  • Soft Start facility as standard & can be used in additional to Burst Firing
  • Unbalanced load, Heater Break, SCR short circuit & Heat Sink over temp. & various other alarm
  • 4 LEDs on front for various indications
  • Internal fuses are standard
  • IP20 Protection
  • Comply with CE EMC
  • Front LED Display as option

Operator Panel “KP” (Option)

KP Operator Panel is designed to be mounted on the front of the cabinet and to be connected to most CD Automation thyristor units via RS485.
Parameters, power, current and alarms can be read on the display.
Local/Remote, Up and Down and Function commands are also available.

Applications and Focus on:

  • Infrared lamp
  • Fournaces
  • Autoclaves
  • Chemical
  • Petrochemical
  • Climatic chambers
  • Pharmaceuticals

The post REVO I 2PH – 2 Phase Unit to drive 3 phase load appeared first on Toshcon CD Automation Pvt. Ltd..

]]> REVO I 3PH – 3 Phase Unit to drive 3 phase load https://www.cdautomation.in/product/revo-i-3ph-3-phase-unit-to-drive-3-phase-load/ Thu, 27 Jul 2023 07:43:47 +0000 https://www.cdautomation.in/?post_type=products&p=85340 REVO I 3PH 3 phase unit to drive 3 phase load Toshcon CD REVO I – 3PH is a Full digital and universal Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, control modes with Phase Angle or Burst Firing Micro USB / RS485 to configure the […]

The post REVO I 3PH – 3 Phase Unit to drive 3 phase load appeared first on Toshcon CD Automation Pvt. Ltd..

]]> REVO I 3PH

3 phase unit to drive 3 phase load

  • Toshcon CD REVO I – 3PH is a Full digital and universal Thyristor unit based on a very powerful dedicated micro configurable via serial communication port for all inputs, control modes with Phase Angle or Burst Firing
  • Micro USB / RS485 to configure the Thyristor, software free available
  • Suitable to drive resistive, inductive, transformer and complex loads requiring current limit and power feedback
  • Universal Input Signal with automatic zero / span calibration
  • Universal firing modes, customer configurable via RS485 comm. as Burst Firing & Phase Angle
  • 2nd Analogue Input for current limit facility or external feedback
  • Universal Control mode V/ V2/ I/ I2/ Vxl
  • Soft Start facility as standard & can be used in additional to Burst Firing
  • Unbalanced load, Heater Break & Heat Sink over temp. alarm
  • 4 LEDs on front for various indications
  • Internal fuses are standard
  • IP20 Protection
  • Comply with CE EMC
  • Front LED Display as option

Operator Panel “KP” (Option)

KP Operator Panel is designed to be mounted on the front of the cabinet and to be connected to most CD Automation thyristor units via RS485.
Parameters, power, current and alarms can be read on the display.
Local/Remote, Up and Down and Function commands are also available.

Applications and Focus on:

  • Infrared lamp
  • Fournaces
  • Autoclaves
  • Chemical
  • Petrochemical
  • Climatic chambers
  • Pharmaceuticals

The post REVO I 3PH – 3 Phase Unit to drive 3 phase load appeared first on Toshcon CD Automation Pvt. Ltd..

]]>