REVO S Family - CD Automation SCR Power Controller

REVO S 1PH Single phase static relay

marketing — Mon, 07 Jun 2021 10:26:59 +0000

Revo S 1PH is a single-phase static relay, complete with heatsink, specifically designed to save space and work.
Current range – 30A, 35A, 40A, 60A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 500A, 600A, 700A, 800A
Voltage range 480V, 600V and 690V (stating from 60A)
Fully isolated from the power
Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
Logic input signal 4 to 30VDC typical (SSR) plus 4-20mA or 0-10VDC Linear input as an option
Constant current drain, independent of supply voltage with SSR input
Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
Side by side mounting
Special design Heatsink with high dissipation value
IP20 protection
Complies with EMC, EAC, cULus® 508 and cUL® us listed up to 700A as an option.
UL® listed for 800A units.
Can be used in conjunction with REVO-PC to provide multi-zone control

marketing — Mon, 07 Jun 2021 13:20:54 +0000

REVO S 2PH is a three phases static relay suitable for driving loads with star connection without neutral or delta, on two phases. The unit has been designed to save space and work.
Current range – 30A, 35A, 40A, 60A, 75A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 450A, 500A, 600A, 700A, 800A
Voltage range 480V, 600V and 690V (starting from 60A)
Fully isolated from the power
Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
Logic input signal 4 to 30Vdc typical (SSR) plus 4-20mA or 0-10Vdc Linear input as an option
Constant current drain, independent of supply voltage with SSR input
Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
Side by side mounting
Special design Heatsink with high dissipation value
IP20 protection
Complies with EMC, EAC, cULus® 508 Listed and cUL® listed up to 700A as an option. UL® listed for 800A as an option.

marketing — Mon, 07 Jun 2021 13:32:18 +0000

Revo S 3PH is a three phases static relay suitable for driving loads with star connection with or without neutral and delta on three phases. The unit has been designed to save space and work.
Current range – 30A, 35A, 40A, 60A, 75A, 90A, 120A, 150A, 180A, 210A, 300A, 350A, 400A, 450A, 500A, 800A
Voltage Range 480V, 600V and 690V (starting from 60A)
Fully isolated from the power
Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
Logic input signal 4 to 30V DC typical (SSR) plus 4-20mA or 0-10V DC Linear input as an option
Constant current drain, independent of supply voltage with SSR input
Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
Side by side mounting
Special design Heatsink with high dissipation value
IP20 protection
Complies with EMC, EAC, cULus® 508 listed and cUL® listed up to 500A as an option. UL® for 800A as an option.

Simone Brizzi — Thu, 23 Feb 2017 11:17:39 +0000

REVO SSR Solid State Relay is suitable for resistive loads
Current range depend by the heatsink and ambient temperature. The rating included in the code number is the teoretical range of the junction, to understand the max current allowed you need to calculate it on the graph.
Supply voltage up to 480V or 600Vac as option
Fully isolated from the power
Zero crossing firing mode (ZC).
Logic input signal 4 to 30Vdc typical (SSR).
Constant current drain, independent of supply voltage with SSR input
Integrated Fuse and Fuse Holder with SR1 Size.
IP20 protection
Complies with CE, EAC and cUL (pending).
An Heatsink is necessary for the correct work of the units, CD Automation offer a wide range of heatsink to allow you to customize your unit.
Heatsink are sold separately and are not included with this ordering code.

Simone Brizzi — Thu, 23 Feb 2017 11:16:39 +0000

REVO SSR Analog Solid State Relay is suitable for resistive and medium or long wave infrared loads
Current range depend by the heatsink and ambient temperature. The rating included in the code number is the theoretical range of the junction, to understand the max current allowed you need to calculate it on this graph.
An Heatsink is necessary for the correct work of the units, CDAutomation offer a wide range of heatsink to allow you to customize your unit.
Supply voltage up to 480V or 600Vac as option
Integrated Fuse and Fuse Holder as a standard.
Fully isolated from the power
Burst Firing (4, 8 or 16 cycles selectable)
4-20mA or 0-10Vdc Linear input as an option
Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
IP20 protection
Complies with CE, EAC and cUL (pending)
Heatsink are sold separately and are not included with this ordering code.

Simone Brizzi — Thu, 23 Feb 2017 11:18:45 +0000

This unit is available in three version
Each unit includes Fuse and Fuse Holder, thyristor and heat sink with its own Firing circuit
Zero Crossing Firing
Max. voltage 240V or 480V AC as option
Insulated input
LED for On Off Status indication
LED for fuse failure indication
Plug in connection for auxiliary and power terminations
Small dimensions Width: 36mm, Depth: 86mm, Height:121mm
Din rail mounting or screw mounting
Can be used in applications with many zones and low power as thermoforming, blow Moulding and Hot Runners.

Available in different type with two or three independent channels
Currents: 50, 60, 75 and 90A
480V or 600V Max Voltage
Zero Crossing Firing
Each unit includes two or three Integrated Fuses & thyristors with its own firing circuit, they share a heat sink
Isolated input
Screw mounting
Can be used in applications with many zones in combination with REVO PC series to get power synchronization, communication, measurement and diagnostic