REVO S 2PH
- From 30 up to 800A
- Voltage range 480V, 600V and 690V
- Load type: Resistance, IR Lamp long and medium waveform
- Inputs: SSR Std, 0:10V, 4:20mA and Heather Break alarm are options
- Firing mode: Zero Crossing, Burst Firing available with analogue input only
General Details
REVO S 2PH
Three phases static relay
- REVO S 2PH is a three phases static relay suitable for driving loads with star connection without neutral or delta, on two phases. The unit has been designed to save space and work.
- Current range – 30A, 35A, 40A, 60A, 75A, 90A, 120A, 150A, 180A, 210A, 300A, 400A, 450A, 500A, 600A, 700A, 800A
- Voltage range 480V, 600V and 690V (starting from 60A)
- Fully isolated from the power
- Zero crossing firing mode (ZC) or Burst Firing (4, 8 or 16 cycles selectable)
- Logic input signal 4 to 30Vdc typical (SSR) plus 4-20mA or 0-10Vdc Linear input as an option
- Constant current drain, independent of supply voltage with SSR input
- Heater Break (HB) alarm to diagnose partial or total load failure with automatic setting, relay alarm output and front LED indication. Available as an option
- Side by side mounting
- Special design Heatsink with high dissipation value
- IP20 protection
- Complies with EMC, EAC, cULus® 508 Listed and cUL® listed up to 700A as an option. UL® listed for 800A as an option.
Documentation
REVO S 2PH – Documentation
Catalog
Manuals
User Manual REVO S 2PH from 30 to 40A (M-RS2-30-40)
User Manual REVO S 2PH IFH (Internal fuse) from 30 to 40A (M-RS2-IFH-30-40)
User Manual REVO S 2PH from 60 to 210A (M-RS2-60-210)
User Manual REVO S 2PH from 300 to 800A (M-RS2-300-800)
User Manual REVO S 2PH from 60 to 800A, 690V (M-RS2-60-800-690V)
3D Models
Size: SR4
Size: SR7
Size: SR15
Size: SR16
Size: S11
Size: S13
Size: S14
Size: S16
Code / Size
REVO S 2PH – Order Code
REVO S 2PH – Size & Dimensions
