REVEX Family
The REVO on demand – Innovation in Power Control
REVEX is a real Universal Unit where you can select:
• Input signal in digital mode, no link jumpers inside
• Firing mode: Single cycle, Half cycle, Burst, Phase Angle, Delayed Triggering, different types of adjustable ramp
• Control Mode (V, V2, I, I2, VxI)
• Communication RS485 with Modbus® protocol std.
• Two Analog input
• Two Digital input
• USB port to program REVEX, should you ever need to re-program from your ordered configuration
• With the units already programmed you can simply switch On and Go
• Save money and time straight out the box without the need to read a long manual
• Save money with REVEX and only pay for functionality you need
REVEX 1PH – The Power Controller On Demand
REVEX 1PH
Technical Specification
- Load type: Normal Resistance, Infrared Short, Medium and Long, Transformer Primary, Cold resistance and SiC elements
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std.
- Firing mode: Half Cycle, Single Cycle, Burst Firing, Delayed Triggering, Phase Angle with or without Soft Start
- Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI
- Communication: RS485 port. RTU Modbus® Protocol
- USB: Port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- Approvals: Comply with CE+EMC / EAC
- Dual Current Limit: For peak and RMS value
REVEX 2PH – The Power Controller On Demand
REVEX 2PH
Technical Specification
- Load type: Normal Resistance, Infrared Short, Medium and Long waveform
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std.
- Firing mode: Burst Firing, Zero Crossing
- Control Mode: Voltage, Current and Power or V2 and I2
- Communication: RS485 port. RTU Modbus® Protocol
- USB: Port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- Approvals: Comply with CE+EMC / EAC
- Dual Current Limit: For peak and RMS value
- All options are shown below with the relevant model code
- HB Alarm to diagnose partial or Total Load Failure and Thyristor Short Circuit
REVEX 3PH – The Power Controller On Demand
REVEX 3PH
Technical Specification
- Load type: Normal Resistance, Infrared Short, Medium and Long Waveform
- Inputs: 4:20mA, 0:10V, SSR and ModBus as std.
- Firing mode: Burst Firing, Zero Crossing
- Control Mode: Voltage, Current and Power or V2 and I2 with additional Transfer to VxI
- Communication: RS485 port. RTU Modbus® Protocol
- USB: Port integrated for configuration in safety mode (No Load and Auxiliary Voltage needed) Unit Powered Through USB
- Approvals: Comply with CE+EMC / EAC
- Dual Current Limit: For peak and RMS value
- All options are shown below with the relevant model code
- HB Alarm to diagnose partial or Total Load Failure and Thyristor Short Circuit